Types of sheet metal processing stamping processes.

Sheet metal processing stamping process can be roughly divided into two categories, there are separation process and forming process separately.

1. The separation process is to make the stamped parts and blanks separate from each other along certain contour lines during the stamping process, while the quality of the separated section of the stamped parts must also meet certain requirements.

2. The forming process is to make the stamping blank under the condition of plastic deformation without destruction and transform it into the required shape of the finished product, and at the same time, it should also meet the requirements in terms of dimensional tolerance.

There are two types of stamping, cold stamping and hot stamping, depending on the temperature situation. Different stamping methods are selected according to the strength, plasticity, thickness, degree of deformation and equipment capacity of the material, and the original heat treatment state and final use conditions of the material should also be considered.

There are two types of sheet metal processing, cold stamping and hot stamping, according to the temperature situation when stamping. This depends on the strength, plasticity, thickness, degree of deformation and equipment capacity of the material, while the original heat treatment state of the material and the final use conditions should be considered.